|
Q: What is the difference between 2B stainless plates and NO.1 stainless steel?
A: 2B cold rolled stainless plates: cold-rolled steel sheet is produced by cold-rolled steel sheet. Put cold No.1 at room temperature to further rolling hot-rolled steel plate to the target thickness of the thin steel plate. Comparison of hot-rolled steel and cold rolled steel sheet thickness more precise and smooth, beautiful, and also offers a variety of superior mechanical properties, especially the processing performance. Comparison of the original volume because of cold brittle, not suitable for processing, after so usually required to be given to customer after a cold-rolled steel sheet annealing, pickling, and surface roughness. Cold maximum thickness is 0.1 - 8.0MM below, as the majority of the thickness of cold rolled steel plant is the following 4.5MM; at least thickness and width of each plant based on equipment capacity and market demand for a decision.
Stainless steel cold-rolled steel sheet are cold-rolled stainless plates production process, the thickness of not more than 3mm is the thin plate, more than 3mm is the thick plate. Used for the production of corrosion-resistant parts, petroleum, chemical piping, containers, medical equipment, marine equipment.
NO.1 hot in terms of relative to the cold, cold is rolled below the temperature of recrystallization, and NO.1 hot is rolled over the temperature of recrystallization. |
News 
